6689676 Bobcat SJC Joystick Controller - Right Hand - Electronic Fly-By-Wire - S185 S250 S300 T190 T300 T870

Bobcat SJC Joystick Controller (Right Hand) — Replaces 6689676

Direct replacement electronic joystick controller for Bobcat skid-steer and compact track loaders equipped with Selectable Joystick Controls (SJC). Fly-by-wire proportional control with multi-axis operation. Replaces Bobcat part number 6689676. Also compatible with machines covered by kit number 7126558. German-engineered precision — at a fraction of the dealer price.

The Problem

Your Bobcat's joystick is drifting, jerking, or completely unresponsive. On an SJC-equipped loader, a failed joystick doesn't just make the machine hard to operate — it makes it dangerous. Arms drifting, bucket curling on its own, or a loader that suddenly lurches can cause serious injury or property damage. Bobcat sells the complete SJC joystick kit (7126558) for $5,800, or a single right-hand controller (6689676) for $1,500–$1,800. Your loader sits idle while you wait for the dealer — costing you hundreds per day in lost productivity and rental fees.

The Solution

This is the identical OEM-specification electronic joystick controller used in Bobcat SJC-equipped loaders. Fully electronic fly-by-wire design with proportional output — the same precision control your operator is used to. Multi-axis control with integrated switches for auxiliary hydraulics and other functions. Direct plug-and-play replacement for Bobcat 6689676. Same German engineering, same build quality — we just offer it at $1,195 instead of $1,800.

Specifications

• Bobcat OEM Part Number: 6689676 (Right Hand Controller)
• Kit Number: 7126558 (complete SJC kit — this listing is the individual RH joystick)
• Type: Electronic Fly-By-Wire Joystick Controller
• Control: Proportional, multi-axis
• Position: Right Hand (operator's right armrest)
• Switches: Integrated auxiliary hydraulic and function switches
• Output: Electronic signal (CAN bus / analog — machine-specific)
• Connector: OEM multi-pin connector (direct plug-in)
• Construction: Industrial-grade sealed housing
• Made In: Germany
• Condition: Brand New

What Are Selectable Joystick Controls (SJC)?

SJC allows the operator to switch between different joystick control patterns (ISO, H-pattern, etc.) using a selector switch. Instead of mechanical linkages, SJC uses electronic fly-by-wire joysticks that send proportional signals to electrohydraulic valves. The result is smoother, more precise control — but it also means the joystick is a sophisticated electronic component, not a simple mechanical lever.

Identification

• Location: Right armrest in the operator cab — the joystick you use to control loader arms and bucket
• Visual ID: Electronic joystick with integrated push-buttons and rocker switches
• SJC Badge: Your machine should have an "SJC" label or your parts book references Selectable Joystick Controls
• Part Number: Check the label on the base of your existing joystick or reference Bobcat parts manual for 6689676

Compatible Equipment

The 6689676 SJC joystick fits the following Bobcat machines (with SJC option):

Bobcat S-Series Skid-Steer Loaders

• Bobcat S185 (SJC equipped)
• Bobcat S205 (SJC equipped)
• Bobcat S220 (SJC equipped)
• Bobcat S250 (SJC equipped)
• Bobcat S300 (SJC equipped)
• Bobcat S330 (SJC equipped)
• Bobcat S510 (SJC equipped)
• Bobcat S530 (SJC equipped)
• Bobcat S550 (SJC equipped)
• Bobcat S570 (SJC equipped)
• Bobcat S590 (SJC equipped)
• Bobcat S630 (SJC equipped)
• Bobcat S650 (SJC equipped)
• Bobcat S750 (SJC equipped)
• Bobcat S770 (SJC equipped)
• Bobcat S850 (SJC equipped)

Bobcat T-Series Compact Track Loaders

• Bobcat T190 (SJC equipped)
• Bobcat T250 (SJC equipped)
• Bobcat T300 (SJC equipped)
• Bobcat T320 (SJC equipped)
• Bobcat T450 (SJC equipped)
• Bobcat T550 (SJC equipped)
• Bobcat T590 (SJC equipped)
• Bobcat T595 (SJC equipped)
• Bobcat T630 (SJC equipped)
• Bobcat T650 (SJC equipped)
• Bobcat T740 (SJC equipped)
• Bobcat T750 (SJC equipped)
• Bobcat T770 (SJC equipped)
• Bobcat T870 (SJC equipped)

⚠️ IMPORTANT: This joystick ONLY fits machines equipped with the Selectable Joystick Control (SJC) option. Standard hand/foot control machines use a different joystick. Verify your machine has SJC before ordering — check your Bobcat parts manual or contact us with your model and serial number.

Why Buy From Trenchwell?

• Save $600+: Bobcat dealers charge $1,500–$1,800 for a single SJC joystick, or $5,800 for the complete kit. We offer the individual right-hand controller at $1,195 — same OEM-spec component, massive savings.
• OEM Specification: This is NOT a cheap aftermarket joystick. This is the same German-engineered, proportional, fly-by-wire controller installed at the Bobcat factory. Same electronics, same proportional response, same sealed construction.
• Plug-and-Play: Direct replacement with the OEM multi-pin connector. Unplug the old joystick, plug in the new one. No wiring modifications, no recalibration required on most models.
• Safety Critical: A drifting or jerking joystick on a skid-steer is a serious safety hazard — especially in confined spaces, near structures, or around personnel. Don't run a machine with a failing joystick. Replace it.
• Expert Support: Not sure if your machine has SJC? Contact us with your Bobcat model and serial number — we'll confirm compatibility before you order.
• Fast Shipping: In stock and ready to ship. A loader sitting idle costs $300–$600+ per day in lost productivity and potential rental fees.

Symptoms of a Failing SJC Joystick

• Loader arms drift up or down on their own when joystick is in neutral
• Bucket curls or dumps without operator input
• Jerky, erratic, or delayed response to joystick movement
• Joystick intermittently loses control and then snaps back
• Error codes on the instrument panel related to joystick input
• Auxiliary hydraulic switches on the joystick stop working
• Machine enters limp mode or safe mode due to joystick signal faults

Installation Notes

• Park the machine on level ground, lower all attachments, and shut off the engine
• Engage the parking brake and remove the key
• Open the cab or ROPS and access the right armrest console
• Photograph the existing joystick wiring and connector orientation
• Disconnect the multi-pin electrical connector from the base of the joystick
• Remove the mounting bolts securing the joystick to the armrest bracket
• Install the new joystick in the same position and orientation
• Reconnect the electrical connector — verify positive engagement and pin alignment
• Secure all mounting hardware
• Start the machine and verify all joystick functions in a safe, open area
• Test: lift arms, lower arms, curl bucket, dump bucket, auxiliary hydraulics
• Verify neutral position — release the joystick and confirm no drift in any axis
• If drift persists, a calibration procedure may be required — refer to your Bobcat service manual

Frequently Asked Questions

Is this the same joystick the Bobcat dealer sells?
Yes. This is the identical OEM-specification electronic joystick controller — same German engineering, same proportional fly-by-wire design, same integrated switches. The only difference is our supply chain, which allows us to offer it at $1,195 instead of the $1,500–$1,800 dealers charge.

Do I need one joystick or two?
This listing is for the right-hand controller (Bobcat 6689676). If both joysticks are failing, you may need left and right. The Bobcat kit 7126558 includes both — but at $5,800, buying two individual controllers from us is significantly cheaper. Contact us for left-hand controller availability.

My machine has hand/foot controls, not SJC — will this work?
No. This joystick is ONLY for machines equipped with the Selectable Joystick Control (SJC) option. Standard hand/foot control machines use mechanical joysticks, not electronic fly-by-wire. Check your Bobcat parts book or look for an "SJC" label on the control panel.

Will I need to recalibrate after installation?
Most SJC-equipped Bobcats will recognize the new joystick immediately after plug-in — no calibration needed. However, some models or serial number ranges may require a calibration procedure through the Bobcat service tool. If you experience drift after installation, consult your Bobcat service manual for the joystick calibration procedure, or take it to a dealer for a quick software calibration.